W4-68 Series High temperature centrifugal fan

 

W4-68-11 No. 6.3D high temperature fan is suitable for conveying high temperature gas with no corrosive content and maximum temperature not exceeding 400 ℃. If the dust content of the gas is large, the dust removal device with dust removal efficiency of not less than 85% should be installed before the fan inlet, so as to improve the service life of the fan.

 

 

This series of fans is a single-suction cantilever type C or D drive. Facing squarely from one end of the motor, the impeller rotates clockwise, called right-hand fan, and counterclockwise, called left cyclone.

 

The impeller is welded with heat-resistant stainless steel. The impeller is corrected by static, dynamic balance, and overspeed test.

 

The housing is welded into a cochlear body by steel plate and fixed on the support.

 

The drive group is composed of main shaft, water cooled bearing box and other parts.

 

The whole bracket is adopted , the vibration absorption is strong , and the operation is stable .

Please contact us and get detailed Technical parameters and Drawings.

We could Design and Produce the Marine fan,Industrial Fan,and Other Ventilation Equipment according to your detailed requirement !